The skinny-film photo voltaic cells weigh about 100 occasions lower than typical photo voltaic cells whereas producing about 18 occasions extra power-per-kilogram. Credit score: Melanie Gonick, MIT

A workforce of researchers has developed a brand new approach for producing ultrathin and light-weight photo voltaic cells that may be seamlessly built-in into any floor.

Massachusetts Institute of Expertise (MIT) engineers have created new ultralight material photo voltaic cells, which may remodel any floor into an influence supply with ease and pace.

These sturdy, versatile photo voltaic cells, that are a lot thinner than a human hair, are glued to a powerful, light-weight material, making them straightforward to put in on a hard and fast floor. They’ll present power on the go as a wearable energy material or be transported and quickly deployed in distant areas for help in emergencies. They’re one-hundredth the burden of typical photo voltaic panels, generate 18 occasions extra power-per-kilogram, and are constituted of semiconducting inks utilizing printing processes that may be scaled sooner or later to large-area manufacturing.

As a result of they’re so skinny and light-weight, these photo voltaic cells might be laminated onto many various surfaces. As an illustration, they may very well be built-in onto the sails of a ship to offer energy whereas at sea, adhered onto tents and tarps which can be deployed in catastrophe restoration operations, or utilized onto the wings of drones to increase their flying vary. This light-weight photo voltaic know-how might be simply built-in into constructed environments with minimal set up wants.

MIT researchers have developed a scalable fabrication approach to supply ultrathin, light-weight photo voltaic cells that may be caught onto any floor. Credit score: Melanie Gonick, MIT

“The metrics used to judge a brand new photo voltaic cell know-how are usually restricted to their energy conversion effectivity and their value in dollars-per-watt. Simply as vital is integrability — the benefit with which the brand new know-how might be tailored. The light-weight photo voltaic materials allow integrability, offering impetus for the present work. We try to speed up photo voltaic adoption, given the current pressing must deploy new carbon-free sources of power,” says Vladimir Bulović, the Fariborz Maseeh Chair in Rising Expertise, chief of the Natural and Nanostructured Electronics Laboratory (ONE Lab), director of MIT.nano, and senior author of a new paper describing the work.

Joining Bulović on the paper are co-lead authors Mayuran Saravanapavanantham, an electrical engineering and computer science graduate student at MIT; and Jeremiah Mwaura, a research scientist in the MIT Research Laboratory of Electronics. The research was recently published in the journal Small Methods.

Slimmed down solar

Traditional silicon solar cells are fragile, so they must be encased in glass and packaged in heavy, thick aluminum framing, which limits where and how they can be deployed.

Six years ago, the ONE Lab team produced solar cells using an emerging class of thin-film materials that were so lightweight they could sit on top of a soap bubble. But these ultrathin solar cells were fabricated using complex, vacuum-based processes, which can be expensive and challenging to scale up.

In this work, they set out to develop thin-film solar cells that are entirely printable, using ink-based materials and scalable fabrication techniques.

To produce the solar cells, they use nanomaterials that are in the form of a printable electronic inks. Working in the MIT.nano clean room, they coat the solar cell structure using a slot-die coater, which deposits layers of the electronic materials onto a prepared, releasable substrate that is only 3 microns thick. Using screen printing (a technique similar to how designs are added to silkscreened T-shirts), an electrode is deposited on the structure to complete the solar module.

The researchers can then peel the printed module, which is about 15 microns in thickness, off the plastic substrate, forming an ultralight solar device.

But such thin, freestanding solar modules are challenging to handle and can easily tear, which would make them difficult to deploy. To solve this challenge, the MIT team searched for a lightweight, flexible, and high-strength substrate they could adhere the solar cells to. They identified fabrics as the optimal solution, as they provide mechanical resilience and flexibility with little added weight.

They found an ideal material — a composite fabric that weighs only 13 grams per square meter, commercially known as Dyneema. This fabric is made of fibers that are so strong they were used as ropes to lift the sunken cruise ship Costa Concordia from the bottom of the Mediterranean Sea. By adding a layer of UV-curable glue, which is only a few microns thick, they adhere the solar modules to sheets of this fabric. This forms an ultra-light and mechanically robust solar structure.

“While it might appear simpler to just print the solar cells directly on the fabric, this would limit the selection of possible fabrics or other receiving surfaces to the ones that are chemically and thermally compatible with all the processing steps needed to make the devices. Our approach decouples the solar cell manufacturing from its final integration,” Saravanapavanantham explains.

Outshining conventional solar cells

When they tested the device, the MIT researchers found it could generate 730 watts of power per kilogram when freestanding and about 370 watts-per-kilogram if deployed on the high-strength Dyneema fabric, which is about 18 times more power-per-kilogram than conventional solar cells.

“A typical rooftop solar installation in Massachusetts is about 8,000 watts. To generate that same amount of power, our fabric photovoltaics would only add about 20 kilograms (44 pounds) to the roof of a house,” he says.

They also tested the durability of their devices and found that, even after rolling and unrolling a fabric solar panel more than 500 times, the cells still retained more than 90 percent of their initial power generation capabilities.

While their solar cells are far lighter and much more flexible than traditional cells, they would need to be encased in another material to protect them from the environment. The carbon-based organic material used to make the cells could be modified by interacting with moisture and oxygen in the air, which could deteriorate their performance.

“Encasing these solar cells in heavy glass, as is standard with the traditional silicon solar cells, would minimize the value of the present advancement, so the team is currently developing ultrathin packaging solutions that would only fractionally increase the weight of the present ultralight devices,” says Mwaura.

“We are working to remove as much of the non-solar-active material as possible while still retaining the form factor and performance of these ultralight and flexible solar structures. For example, we know the manufacturing process can be further streamlined by printing the releasable substrates, equivalent to the process we use to fabricate the other layers in our device. This would accelerate the translation of this technology to the market,” he adds.

Reference: “Printed Organic Photovoltaic Modules on Transferable Ultra-thin Substrates as Additive Power Sources” by Mayuran Saravanapavanantham, Jeremiah Mwaura and Vladimir Bulović, 9 December 2022, Small Methods.
DOI: 10.1002/smtd.202200940

The study was funded by the MIT Energy Initiative, the U.S. National Science Foundation, and the Natural Sciences and Engineering Research Council of Canada.